Filters

Types
More…
Sort By
Select option
3 AVAILABLE
3000 Ton SSDC Link Motion type press. Stroke: 22.83", Die Height: 47.3", Slide Adjust: 1.96" L-R: 86.6, F-B: 53.2" 90" wide window opening SPM: 14-20
--
Tonnage
22.8in
Stroke
--
Shut Height
20.0spm
SPM
1996 Aida Mechanical press, model PMX-L2-500 Link motion, 2-point, Stroke: 300mm SPM(unloading, continuous): 30~60SPM Micro inching: 10spm Die height: 700mm Slide adjustment: 100mm Slide size: 245...
1982 AIDA 1000 Ton Transfer press. Model FT4-100G, with 6 stages. Slide size 1900 x 4500 mm.
1000.0T
Tonnage
600.0mm
Stroke
1983 Aida CFT 60, 600 Ton capacity Cold Forging Press. Serial #: 16100-0017, Machine is not in operation however mechanically in good condition. Needs upgrading of the controls. Stroke: 250mm SPM:...
600.0t
Tonnage
150.0mm
Stroke
Includes a 1988 Ajax 2500 Ton Hot forging Press and Hosung 300 Ton trimming press.
52.0in
X
22.0in
Y
24.0in
Z
20.0hp
Power
Gas Turbine: Rolls Royce Allison Gearbox: Niigata Generator: Toshiba
Model: Mega-200 Engine 200Hp 460Vts Hydraulic system for adjusting the retention cone at the outlet of disc.
Lot of 40 Power Focus 4000 DC Controllers for sale.
3 AVAILABLE
CNC lathe manufactured by VDF BOEHRINGER type VDF 315 OM-4 year 2001 technical data: max. Swing diameter: 550/520 mmmax. Machining lengthways: 450 mm max. Machining lengthways on the revolver: 280 ...
Used as emergency generator and has very low hours.
The line is installed in 1999 and went through a few upgrades. Latest upgrade was in 2019. Unit is capable of coating: Polyester, Silicon Polyester, PVDF, High polymer Polyester etc. Production ca...

Newall Roll Grinder

Roll Grinder
Stock #: 2398
Used - Good
Two units of Newall Roll Grinders. Built in 1977 and overhauled in 1988.
Manufacturer: Craven(U.K) CNC system: 840D(Siemens)
4000.0mm
Swing
15000.0mm
Centers
--
Spindle Bore
300.0kw
Power
Daewoo Puma 15" NC lathe. Good working condition.
29.1in
Swing
62.0in
Machining Length
2.0
# Axis
15.0in
Chuck Size
Built in 2001, the unit consists of four (4) 1500 KW Daihatsu Model 6DK-18, 6-Cylinder engines and 4 units of Nishishiba Generator units, model NTAKL-SE units. Total outpu of 6000 KW.
1118.11in
X
248.03in
Y
78.74in
Z
1) Stopped in January, 2021 2) Manufacturing year: 2016 3) Operation hours: 7225hours /7860 hours / 6203hours 4) There are some spare parts. 5) Maintenance carried out through 2020.
968.0kw
Power
Used in very good conditions.
528.0kw
Power
Diefenbacher 400Ton Straight Side Hydraulic Coining Press., S/N 42031001(New 1997), Equipped: with Siemens COROS OP5 Operators lnterface with Touch Pad and LED disptay. Stroke 12" BOLSTER SIZE:...
5-Axis Machining Center, Fanuc FS-31 la5, 20,000 RPM, Maximum X-axis: 500mm. Maximum Y axis: 350mm Maximum Z-axis: 510mm Maximum diameter of the workpiece: 350 mm Maximum height of the workpiece; ...
19.7in
X
13.8in
Y
20.1in
Z
5.0
# Axis
Used 2005 Doosan VM70 VMC. Spindle speed: 10,000 rpm
51.1in
X
27.5in
Y
30.6in
Z
--
Power
2013 Doosan PUMA V400-R. Max turning length: 18.1", Max Turning Diameter: 19.5" Spindle speed: 3000 rpm
--
Swing
18.1in
Machining Length
2.0
# Axis
--
Chuck Size
Doosan VM 960 Gearbox type vertical machining center. 6000 RPM
2000.0mm
X
960.0mm
Y
800.0mm
Z
--
Power
DOOSAN MYNX 7500-50 VMC Gearbox type with 24 ATC, AICC Converter. YOM 2016.
60.0in
X
30.0in
Y
24.6in
Z
30.0hp
Power
2004 Doosan DB-130C Horizontal Boring Mill.
5.12in
Spindle Size
118.0in
X-Horiz Tvl of Table
78.8in
Y-Vert Tvl of Head
35.0hp
Power
2017 Doosan DBC 130LII Horizontal Boring Machine. 40 ATC / X4000 x Y2500 / Z2000 x W700
5.12in
Spindle Size
157.5in
X-Horiz Tvl of Table
98.5in
Y-Vert Tvl of Head
35.0hp
Power
NVER USED.